Learning about HVAC may seem daunting, but if you have the right information, it doesn’t have to be a difficult task. If you want to learn more, use the tips here to help you. If you’re interested, keep reading.
By the end of spring, the fan blades and coils of your condenser should be thoroughly cleaned, so operation can proceed with greater efficiency. The power to the unit should be removed before you begin any maintenance, even cleaning. Also, make sure you remove any debris or leaves from the condenser unit outside.
Every spring you should clean the coils and fan blades on your condenser fan. Before you begin cleaning the unit, make sure that it is unplugged. Remove the grill and the blades, and then you can give them all a gentle clean.
During the fall, leaves can gather around your HVAC. Make certain you are cleaning the fan grill often if trees nearby have leaves that are falling. A blocked unit can quickly become a broken unit.
If you have oil ports as part of the fan condenser, annual lubrication is key. These ports have a metal covering. Sometimes it is rubber. Use a lightweight, detergent-free SAE 20 oil, putting 10 drops in each port.
If you are choosing where to place your outdoor compressor device, try to put it in a place where there is plenty of shade. When the unit sucks in cooler air, then less work is required to cool it further which in turn boosts the units efficiency.
Put your outdoor unit in places with shade. As it brings in cool air to cool, you will save a lot of money.
Condenser units for the outdoors should be shut off when it starts to get cold outside. This means that you should turn it off to prevent damage if the weather falls under 60 degrees Farenheit. You will save in repair bills and increase the efficiency of your system.
With the proper education, an HVAC system is able to be understood. It is always good to take enough time that you will be able to learn what you need to know. Use the tips here to help you get to work now!